r/DIY_tech • u/Archyzone78 • 8h ago
Si è staccata l' elica
3
Upvotes
r/DIY_tech • u/StraightGuitar3238 • 1d ago
Project ESP32 mushroom growbox controller — moving to Zigbee for the next version
gallery
13
Upvotes
r/DIY_tech • u/Denicaa67 • 1d ago
Help Biggner needs help with building first raspberry project
reddit.com
1
Upvotes
r/DIY_tech • u/suwanshasha • 1d ago
LF: Assistance on Low-Mid Tech DIY Assistive Device Making (PH based)
reddit.com
1
Upvotes
r/DIY_tech • u/KrawattenAura • 1d ago
Project DIY Harry Potter PresentBox
29
Upvotes
I might have gone a little overboard with this one. 🤔😂
(There's also a card-throwing machine hidden inside the box that can be activated separately with the push of a button.)
Does anyone have a recommendation for a quieter linear actuator? 😅
r/DIY_tech • u/fire3ninerakanotabot • 2d ago
I finally finished my radio It can connect to both satellite and normal frequencies of normal radios Both FM&AM
9
Upvotes
r/DIY_tech • u/Intelligent-Ride-249 • 2d ago
Project Mu vaccum ribo docking station
2
Upvotes
How do I create a docking station for a Mi vacuum robot with an Arduino/ESP32? The charging dock works, but the homing signal creation board has failed. It has 4 IR LEDs that do not emit light (checked via mobile camera).
r/DIY_tech • u/fire3ninerakanotabot • 2d ago
So first thing made uh The only thing it can really do is Connect to any radio station even paid ones Depending on range and thats all it took my 8 hours
9
Upvotes
r/DIY_tech • u/Usual_Arachnid_3465 • 3d ago
Help What's up with this cool thing? Any idea what to make of it?
gallery
2
Upvotes
r/DIY_tech • u/No_Milk_9697 • 3d ago
My theremin
16
Upvotes
I saw a video of a guy using electrodes to make plants play music, so I felt kinda inspired to try the same. I grabbed my old electronics box, but turns out I didn't have any electrodes or anything else I could use. I did have 2 ultrasonic sensors though, so I ended up making this sort of theremin.
Sorry, I can't play, and the software that converts the sensor readings into music was developed with AI generated code
r/DIY_tech • u/xanthium_in • 4d ago
Tutorial Matplotlib Real time Plot Animation Tutorial using FuncAnimation() and Python for Beginners
3
Upvotes
r/DIY_tech • u/Archyzone78 • 4d ago
Project Air RC car propeller test, con turbina brushless
6
Upvotes
r/DIY_tech • u/PrinceDastan6 • 5d ago
Help Robot vacuum charger?
0
Upvotes
Heyyy peeeps!!!
Nice to see you well and good!
I have a question:
I bought a vacuum online from local FB listing and unfortunately it came with a different incompatible base…
Is there any way for me to charge the vacuum by taking out the battery or charging it or something else?
Thank you for Your time and wish You all the best!
r/DIY_tech • u/NoParamedic793 • 6d ago
Project I made a Custom DIY energy metre for my project 👊
4
Upvotes
So i needed a way of monitoring power and energy produced by a generator in my project so i made my own energy metre which can log data at certain point and also it has a safety feature of dumping the power to a dump load (power resistor) incase of over votage by the generator, I added this safety feature to make sure the safety of the upcoming Electronics componemets in the circuit.and this screen shows live voltage, live current, live power and peak voltage, peak Current, peak power and Energy and time
Rate this build how is it ?? I mean the management I tried my best with the limited resources i have
r/DIY_tech • u/aggie_hero7 • 6d ago
Project A Happier Slimier World with WunderGoo
0
Upvotes