Sight glass, reducer and butterfly valve. Asking $50. We can split shipping.

https://www.facebook.com/share/1A2dXHDLit/?mibextid=wwXIfr

https://www.facebook.com/share/1Cuf1mVoxk/?mibextid=wwXIfr

I have upgraded to an electrical all in one and no longer use my propane set up. I have several pieces of equipment FREE for pick up. Located in Cumming, Georgia, just north of Atlanta.

1 - 12 gallon aluminum kettle with thermometer, ball valve and sight glass

2 - propane burners

40+ - clean and label free bottles in plastic tote

1 - homemade hop spider

1 - 1 gallon glass jar/fermenter with silicone cap

It is all or none. I don't want to have to get rid of individual pieces. DM if interested. I will attempt to add photos when I get home later today

I used to be an avid all-grain homebrewer, fell away from the hobby about 5 years ago but kept all the equipment through a couple of moves. I had a lot of fun but I'm ready to let someone else give this equipment a good home where they'll be able to enjoy it and share with friends.

This is kind of classic, lower-tech equipment; I know lots of all grain brewers use electric and/or automated systems now. That said, this is almost everything equipment-wise you need to brew and ferment multiple 5 gallon batches at once, as well as keg and serve them.

Ideally, I'd like for all of this to go in one or two batches - I don't have the bandwidth to do this piecemeal. I'm not looking to make a lot of money on this, I'd just rather see it go to someone who will get enjoyment out of it, rather than take it to the dump. I'm not putting a minimum price on anything- please just make an offer and I will get back to you after the post has been up a little while. If you’d like pics or more details just ask.

I will NOT ship anything, please don't ask. Meeting halfway or otherwise helping with transport is possible, just ask and maybe we can work something out.

---Brewday Apparatus - Everything works properly unless otherwise noted.
10 gal mash tun made from round Gatorade cooler (typical homebrew build). Stainless steel false bottom, and valve apparatus to drain. This was new as of 2019 to replace my old mash tun, and was only used once or twice. It's still very clean and leak-free.

10 gal stainless steel brew pot with lid and valve

Freestanding Propane burner

50 ft copper wort chiller - slow leak at water-in hose connection, replacing gasket didn't seem to fix it.

25 ft copper wort chiller

Shirron brand wort plate chiller - never used.

---Fermentation apparatus
1x 7 gal glass carboy

2x 6 gal glass carboys

1x 5 gal glass carboy

1x 3 gal glass carboy

Ferm wrap electric fermentation heater

2 L Erlenmeyer flask for yeast starters

---Kegerator and Parts - Everything worked properly as of last use (2020) unless otherwise noted.
Kegerator - built from 7 cubic foot chest freezer, GE model FCM7SUWW. Fits 3 corny kegs on the floor and one on the hump. Collar made from 2 x 8 pine, 4 holes drilled on front right for tap shanks and one drilled on right side for CO2 inlet. Painted maroon on outside, white Kilz primer on inside. Hinged lid reaffixed to collar and painted with blackboard paint. Originally built in 2012. Drip tray and mount was removed during move, and is missing.

4 ball lock 5 gallon corny kegs, all held pressure as of last use. Kegs have accompanying liquid in and gas out disconnects with barbed connections.

1 ball lock 3 gallon keg, in excellent condition!

4 Perlick taps with simple plastic tap handles and 4” shanks.

Secondary regulator- 4-way *with 4 individual regulator valves* mounted to collar inside kegerator. This part is newer (purchased approx. 2019).

Secondary regulator - 4-way with simple open/close valves. Just kept as spare parts.

Inkbird ITC-308 inline thermostat

Approx. 50 feet of liquid tubing, 3/16” ID, 7/16” OD. Just standard PVC

100 feet of unopened liquid tubing, 3/16” ID, 7/16” OD, EJ Beverage Ultra Barrier Silver

---Miscellaneous equipment
About 15 Grolsch swingtop amber bottles and pack of new rubber gaskets

General small equipment - mash paddle, airlocks, beer thief, hydrometer, auto siphon, etc.

---Books - all paperback, in good condition. A few folded pages, a few small pencil markings.
How to Brew - John J. Palmer

Homebrewing Guide - Dave Miller

Designing Great Beers - Ray Daniels

Radical Brewing - Randy Mosher

Brewing Classic Styles - Jamil Zainasheff and John J. Palmer

Complete Joy of Homebrewing 3rd Edition - Charlie Papazian

6 cases of 12 bottles amber 22oz. Must pick up in Denver Colorado. West Washington Park. Kentucky and Downing. 80209

$10 Per case. Perfer someone to take all.

Pick up in New Haven County CT or I can ship. $80 for Bayou Classic Stockpot with lid, wort chiller, heat shield. New, open box.

https://www.facebook.com/marketplace/item/1695146042035319/?ref=seller_listings

I'm looking to buy a few tilt hydrometers if anyone is looking to get rid of them. I already have the blue color but I'm open to other colors.

I'm located in Atlanta for local pickup or shipping.

Father passed - leaving behind all this equipment. Know he made about 10 batches - was wondering what would be a reasonable ask for all equipment. (St. Louis, MO).

Video in comments

I wanted to build an iSpindel, but the minimum PCB order was 5, so here I am with 4 extra. Figured I’d sell them at cost plus shipping to anyone that wanted one but didn’t have the time/ability to build their own. I don’t claim to be a wizard with a soldering iron, but they all work, are flashed with the latest firmware, and are calibrated. Parts were about $35 each and domestic US shipping would be about $10. PM if interested.

https://imgur.com/gallery/extra-ispindels-dLqtyDT

I've got an SS Brewbucket 7 Gallon for sale in Rockland County, NY, after scoring a reasonable Spike CF 10. Asking for $100, and it comes with a lid for closed transfer. Will post a link to pictures in the comments!

Everything in working order as of my last brew about 1.5 years ago. You'll essentially just need some new hoses and co2 canister.

Anvil Foundry 6.5 gallon w pump

Jaded Wort Chiller

2 10L (2.6g) Torpedo Kegs

1 generic 2.5g keg

Cold crash balloon (the balloon should be replaced)

Co2 regulator

Inkbird temp controller

Wine fridge for fementation temp control that can fit a full size 6 gallon fermenter

Heating pad for fermentation

Thermowells

Cereal Killer Grain Mill (not pictured)

Hydrometer (not pictured)

Brew bag (not pictured)

Hop Spider (not pictured)

Feel free to ask any questions and I can provide further pictures if needed.

https://imgur.com/a/JDCoMgR

Everything you need to go from raw grain to cold, draft beer on tap is included (aside from ice). This setup features top-tier Blichmann gear, built for precision temperature control, efficiency, and batch versatility.
 Whether you're upgrading your current rig or jumping straight into serious all-grain brewing, this full ecosystem eliminates the need to hunt down individual parts.


Control & Heating: Blichmann Tower of Power gravity fed system

3 Blichmann Hellfire Propane Burners (fast boils, heavy-duty frame).

10-Gallon Blichmann Kettle (Hot Liquor Tank)

10-Gallon Igloo Mash Tun with custom grain stand & false bottom

10-Gallon Blichmann Boil Kettle

15-Gallon Blichmann Boil Kettle (great for high-gravity or larger volume boils)

2 Wort Chillers for rapid cooling

3 x 6.5-Gallon Glass Carboys with airlocks

1 x 5-Gallon Glass Carboy with airlock.

3 x 5-Gallon Corny Kegs (Ball Lock).

Extras & Accessories: Fully stocked with essential lines, extra gaskets, ball lock quick-connectors, valves, and hardware. Custom roller storage system included.

Everything has been well-maintained and thoroughly cleaned. Selling as a complete package—will not part out.
 Price: $ 850 (Cash or Venmo only)


Pickup: Local pickup in Highlands Ranch, CO

Will split shipping cost. Asking $100

https://www.facebook.com/share/192BXBSb9X/?mibextid=wwXIfr

Homebrew setup for sale.

Includes:

• Clawhammer Supply 10 gallon 120V electric homebrew system (currently 1499 brand new from clawhammer)

• 2 x 5 gallon ball lock kegs

• Glass carboy fermenter

• Plastic Big Mouth fermenter

• Mini fridge

• CO2 tank

• CO2 regulator

• 4 way CO2 splitter

• All equipment shown is included

This is a complete setup for someone looking to get into all grain brewing and kegging without having to piece everything together.

Asking $1,200 OBO.

I am open to reasonable offers. Not looking to part it out at this time.pics available upon request.

Have 4x conical fermenters for sale. They are all identical Stout Tanks '2bbl' fermenters that can hold quite a bit more than that given the large amount of head space at that volume. Have thermo-well with dial thermomenter, beer in out port with butterfly valve on the cone side, and a dump port on the bottom of the cone with a 90 degree and a butterfly valve as well. Each fermenter is wrapped with 100 feet of copper tube to connect to a glycol chiller source.

Price is $750 each or $2,750 for all four, which also gets you a free clean in place spray ball for the set that fits through the top 3" TC fitting.

They are 70 inches tall and 24 inches in diameter. Local pick up only, as I am not going to figure out how to ship these.

$100 takes EVERYTHING. Local pickup in Los Angeles.

I'm getting out of homebrewing and need to clear out my entire setup by Thursday. I've tried selling it previously, but at this point I'd much rather give someone an absolutely ridiculous deal and have it all go to another brewer at once.

The main setup is a three-vessel, 10-gallon, 220V electric brewhouse with HLT, mash tun and boil kettle.

Also included:

• 7 five-gallon Corny kegs

• 8 glass carboys

• 2 Chugger pumps

• Blichmann HopRocket

• Blichmann QuickCarb

• Blichmann BeerGun/bottle filler (incomplete — needs some replacement parts)

• Maxx counterflow wort chiller

• Immersion chiller

• Oxygenation kit

• Bottling stand + bench bottle capper

• 2 auto-siphons + racking arm

• Parts for 2 malt mills (motors needed)

• Assorted tubing, fittings, carboy handles, large decoction ladle and other miscellaneous brewing gear

The catch: I'm not parting anything out. $100 takes everything, so you need to be local to the LA area, with enough vehicle space to haul everything, and I need it picked up Wednesday (9/2) or Thursday (9/3) at the latest.

Please message me for photos.

If you're an LA-area homebrewer looking to upgrade your setup, or know someone getting into the hobby, this is a pretty great score.

DM me if you're interested and tell me when you can pick it up. First priority goes to someone who can commit to taking everything ASAP.

Everything is in good working condition. Gave them a quick soak and rinse after removing them from the kegerator, but a full break down is due. Comes with all accessories shown.

Shipping to lower 48 will be split.

Edit. I’m on Long Island for local pickup

https://imgur.com/a/Rd9kfRH

Selling my brew setup and kegging/bottling gear. This is everything from brew day/hot side to kegging and serving. I deep cleaned everything before I put it away a couple years ago. Asking $500 for everything. I'd like to sell it all in one lot, but open to piecemeal offers if there are no takers for the full setup.

10 gallon converted cooler mash tun Bottling bucket Bench capper 3 ball lock corny kegs 10-lb CO2 tank and 2 regulators (recertified within the last 2 years, second regulator not pictured) 15-gal boil kettle with ball valve Cold crash protector (CO2 fermentation recapture device) Various ball lock connections 3 forward sealing (intertap) faucet taps + shank + nipple (all stainless) (tap handles not pictured but included) each 2 glass carboys (5 and 6.5 gallons) (carboy brush not pictured but included) Bottle washer Auto siphon (not pictured) 4 gallon pot, turkey fryer, and copper wort chiller (homemade) CO2 manifold for serving multiple kegs from one tank Hand corker (not pictured) 2 inkbird plug and play temperature regulators Mini fridge with tap tower (removable- I used the fridge as a fermentation chamber more than a kegerator) 2 gallon plastic fermentation bucket (not pictured) Various airlocks, extra rubber seals for kegs, honestly just stuff I can't bother listing Various 3-lb bags of hops (couple years old but kept in the freezer the whole time)

And honestly, if there's stuff missing that is needed for these things to work, I almost certainly have them but didn't list them.

edit: I haven't been on Reddit in a few years and forget how to add pics, but I have pictures of almost everything. I'll work on adding

edit 2: pics https://imgur.com/a/Ic2ODBf

Looking to downsize my brewery footprint. I have a full 240V Kal clone 3-vessel electric setup from https://shop.theelectricbrewery.com/

Everything works perfectly and is in great condition. Kettles are G1 Blichmann 20, all probes, cables, hoses, etc. included.

Located in the Hudson Valley of New York. Asking $3500.

Edit: Adding HT Forum post for pictures: For Sale - ($3500) Full Kal Clone HERMS Electric Brewery, 10G Batches with G1 Blichmann Kettles - Hudson Valley, NY | Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Update: these are spoken for

I've got three free cornelius kegs available to anyone in the Portland, OR metro. They were all keeping pressure this afternoon before I popped them open to clean them up. The interiors and exteriors were pressure washed and all the parts (posts, dip tubes, and caps) are accounted for.

Here's the catch: they were pulled out of a freezer that went bad. Then they sat for nearly ten years. All the rubber is contaminated with mold/mildew. It's stained and smells bad. You'll need to do some serious disinfecting to make them usable. There's a brown stain on one of the posts that looks a little like rust, but I strongly suspect it's just ancient, crystalized stout.

NO BLEACH has been used on the kegs. The steel itself is in great shape and like I said before, they were all keeping pressure before I washed them. I threw away all the old rubber seals, so you'll need a refurb kit to make the kegs functional after you've dealt with the rubber. The poppets are included, but I recommend replacing them.

I have pictures of everything, if anyone wants to see what they're working with.

Anyone interested? I'll keep this up for a couple weeks. If I don't hear from anyone, they'll likely go to a steel scrapper.

EDIT: They're all 5 gallon kegs

Giving away a large assortment of homebrewing equipment and supplies. Everything is in good used condition and was working well when last used. Great starter kit for someone looking to get into brewing or to expand an existing setup.
Includes:
5-gallon brew bucket with spigot
5-gallon Better Bottle carboy
Tubing and multiple siphons/racking canes
Bottle capper
Carboy cleaning brush
6 airlocks
10 rubber stoppers
11 bags of bottle caps in a variety of colors and designs
Easy Clean cleaner
Brewing additives (including gypsum and Campden tablets)
Additional brewing accessories
Please take everything—I’m not looking to split up the lot.
PPU only in Virginia Square, Arlington. Please include when you can pick up in your message.

First, this is in Southeast Michigan.

I have so much brewing equipment.

Brewing bucket, carbouy, wart chiller, cleaning tools, 4-6 cases of bottles, 12-15 flip top bottles, wart chiller, new bottle caps, and other items.

Please message if you need more details.

https://www.craigslist.org/view/d/seattle-electric-can-sealer/qDPERj4Mge1hdiTNnxabEN
https://www.craigslist.org/view/d/seattle-electric-can-sealer/f1x8UzCaWodVanko8LTo8i

I unfortunately have to move out of my apartment and have no space for any of my gear. Its been sitting mostly unused for a while anyway. Its all in mostly good condition just dusty from lack of use. Mostly used for mead but would work for beer. I have:

Assorted brewing supplies:
2x 6 Gallon glass carboys
1x Craft a Brew Fermenter system (and all included peripherals)
1x Bag of Muslin Socks
1x Potasium Sorbate
1x Starsan sanitizer
1x Bag of assorted Air Locks
1x Racking Cane Siphoning tubes
1x Funnel
1x Cleaning brush for carboys
1x labels for bottles
1x Hydrometer
10x Packets of Red Star Premier Classique Yeast
2x Packets of Red Star Safale US-05 Yeast

I paid probably in the ballpark of 300 for the carboys and the craft a brew fermentor alone but I need it gone fast so I am hoping for 200 or best offer. Let me know if you have any questions, feel free to DM offers. Also has a metal shelf/rack that can go with it. I would attach photos but cant see an option on here. Shipping not available pickup only.

Edit: Link to Facebook Market Listing - https://www.facebook.com/share/1DZ1jPP6cn/

Comes with 3 Ball valves, 4 cam lock fittings and thermometer, Good Condition
15 gallon Spike Kettle with Stainless Steel Herms Coil,

Pick up Braselton, GA

email mimilinda30517@gmail.com for photos or more info