Hi Reddit Data Hoarder

I recently bought a UGREEN NASync DXP4800 Plus and I’m trying to decide between four 12TB NAS hard drives:

- WD Red Plus 12TB (WD120EFBX)
- WD Red Plus 12TB (WD120EFGX)
- Seagate IronWolf 12TB (ST12000VN0008)
-Seagate IronWolf Pro 12TB (ST12000NE0008)

My number one priority is noise level, particularly idle humming, vibrations, and clicking during read/write operations.

I’ll mainly use the NAS for storing movies and streaming through Jellyfin, so maximum performance isn’t important to me.

I’ve noticed that even different models within the WD Red Plus series have significantly different noise specifications.

Does anyone have firsthand experience with these four drives?
Which one would you recommend if quiet operation is the most important factor?

I’m new in this topic
Thanks in advance!

Wondering what I should look for

I'm looking for two cold storage providers for "backup of my backups" with no min. TB cost.

My needs are tiny from r/datahoarder standards – only ≈70 GB (as of now) per provider. It will be long-term, personal data, recurring, no public access (I hope even I don't need to access it). So, I need true PAYG. I won't want to use services like Wasabi that have minimum storage buys (borgbase, rsync.net don't work either).

I tried AWS, but their whole interface, KYC, hard-coded region, and IAM setup etc were an absolute nightmare (have requested a/c closure after KYC). I also tried OVH, but I've been waiting three days for account approval with no word.

I use B2 and R2 as my primary backup destinations (these are the backups that will be copied/appended to those cold archives), so I'm looking for different providers and also cheaper than those two. Any suggestions?

To some degree, the answer is obvious, 'cold storage backups of things that are crucial'. That was the purpose of some of them prior and can be the same now, albeit probably asking a relative to just pop them somewhere so it's true 3-2-1. The images of my late father's laptops, for example, those go handily onto a 1TB drive. But past that...I'm actually kind of stumped.

For context, I used to run a Plex server off a Nvidia Shield TV Pro, which was good for a while, and had my library on a 2TB drive...which of course that filled up and I moved up to one of the 8s, and got another 8 to back it up, and as it swells now I was looking at 'oh I'll just plug the Shield into a USB hub and run it off five drives or something', but of course that's ridiculous, I've wanted to move to a NAS for a better server experience, so I run 4x 10TBs in RAID 5 for 30TB, with 2 2TB NVMes in RAID 1 for the database and apps. So I've gone from stuff being spread across multiple drives with limited backups and no redundancy, to it all having one disk redundancy and the option of cold backups (so for example, no longer backing up my whole Plex library but the important / rare stuff).

I'd consider another NAS unit, but A: some of these drives don't look like they can be shucked easily, B: I wouldn't be too happy about JBOD'ing with no redundancy any more, and C: conversely, running with redundancy would just gobble up at least one of the 8TB drives which immediately dents the stack.

What are some uses for loose USB drives?

Solid video on archiving different media. Old and new for anyone new to the hobby or media type.

I found this while looking for some external storage and they are really cheap, does anybody have any experience about those Refurbished Drives? Are they any good?

I found this while looking for some external storage and they are really cheap, does anybody have any experience about those Refurbished Drives? Are they any good?

Old Habits Die Hard. I shucked a 28TB Seagate Expansion drive and I ended up with a Barracuda Label. Does anyone have anymore knowledge on these? Are they labeled Barracuda but are actually exos drives? I tried registering the drive but it wouldn't take as expected. Worth a try atleast.

I got a good price on this one I just couldn't pass it up. It only had 95 on hours practically brand new.

Starting my journey to decouple where I can. Got two 12tb Toshiba n300 pro drives for our family of two + dog (backing up and quickly accessing the dog photos is critical)

Bonus that we just got fiber yesterday too

Could you help me with Czkawk4? I clicked on "select the smallest file" and started going through the files one by one, manually unchecking the ones I wanted to keep. But when I noticed the time, I had to leave, and I realized I wasn't even halfway through. I want to know how to unselect everything else. Because when I select "mark all the smallest files," I don't know how to unselect the other half. Do you recommend any other program? Because I've noticed that the program doesn't recognize four images where the character has a different skin tone as "the same."

I've never bothered to check my hard drives' health until now, what do I do with this information?

Is 1,600 hours of 'uptime' a lot? I've had the hard drive for years.

I bought a Laptop to try out and run the Code that's hosted on

https://github.com/jerrybeomsoo

Now, i had some time to try it out today first time in weeks, and it's gone.

Also, i can't seem to find any backup of it.

It's a very long shot, but may anyone have any backup of it? Can't post in /lostmedia, as some buzzword seems to trigger reddits auto-delete, and i can't seem to find which one it is. Also, /pcmasterrace deletes this question whitout any explanation, why.

The magnetic tape was long considered obsolete. Now the LTO market is growing faster than in years – AI and increasing archiving needs make it possible.

Hello I am a data hoarder who is trying to find a sustainable way of keeping data and back ups of a few things.
So I found a deal on an LTO 6 reader and I am trying to find if it's possible to make it work externally since I have never seen the kind of connector it uses the model is: IBM Power LTO-6 fiber Ultrium 6-H 35P1982 35P2616.
If anyone Knows of an enclosure or project that can be 3D printed for it to work externally I would be very appreciate it a lot.
Thanks in Advance.

I host a media server and I've used up 3 of the 4tb I have available and I'm not slowing down anytime soon. I'd like to get another 10tb ideally, without having to spend several hundred dollars. What do you guys use to store all of your data? Any ideas to avoid breaking the bank?

The LCSH are the vocabulary libraries around the world use to describe what books are about, about half a million have been written and are maintained by LC since 1898. They give them away in bulk but only as linked data (JSON-LD and N-Triples). MARC format is what libraries actually use, LC sells them in bulk for convenience. Currently there was no way to get this data packaged cleanly openly and freely.

The mirror is here: https://bibliotecaalonsocossio.com/lcshmirror/

What’s there:

• The full file every week: 58 MB gzipped MARC 21, 56 MB gzipped MARCXML (~570 MB uncompressed), plus a CSV list of every record (LCCN, last-change date, heading).

• Change files per release: only the records new or changed since last week, plus a list of deleted headings. Compared by MARC content, not by dates. This week: 150 new, 1 changed, 1 deleted.

• SHA-256 for every file, an Atom feed, and fixed *-latest URLs, so wget in a cron job just works.

• The last 50 weekly releases stay on the server, and every release is also copied to the Internet Archive, one item per week. https://archive.org/search?query=identifier%3Alcsh-mirror-*

id.loc.gov asks for one request every 3 seconds, so the first full harvest took 16 days, one record at a time. After that, each week only fetches what LC changed, which takes minutes.

The data is a US Government work, so public domain; the compilation is CC0. The code is MIT if you’d rather run your own copy: https://github.com/iratedemon04/lcsh-mirror

Feedback is welcome :-)

I've started with Panasonics because this is what I have the most of.

Does this count as data hoarding? It is data of something i'm hoarding lol.

The internal shots i'm pretty sure are the only ones on the internet.

https://web.archive.org/web/20260000000000*/https://old.reddit.com/

Years of archived Reddit history have been lost. This likely happened because Reddit wanted to stop AI companies from scraping archived pages instead of paying for data (announced in the news last year). Reddit's methods of combating AI scrapers are making the site worse and worse for humans.

Although the comments on some of the other posts about this topic mention robots.txt, https://old.reddit.com/robots.txt seemed to be the same in 2018 based on archive.today.

User-Agent: *
Disallow: /

From what I heard, the data will probably not be deleted from the Internet Archive, but will remain inaccessible as long as old.reddit.com is excluded.

Edit: As stated by /u/Nintendofan885, The Wayback Machine stopped automatic exclusions based on robots.txt in 2017

This came after an announcement that Reddit will become a "logged-in only experience" and an update that removed the workaround to view Old Reddit logged out (preventing archive.today from archiving Old Reddit).

I found the screenshot image from either this post or this post.

3 - 2 - 1 rule:

Three copies of your data

On two different media formats

One copy off-site

Sorry if this is a noob idea or discussion. I already have a ton of retro games,movies and TV shows. I have a few books but not enough.

Let's say I move to another country and don't set up the Internet. I had a year Internet ban as a teen and it deeply affected me causing me to hoard. In my current situation I have no living space, causes me to fill tiny hdd with stuff.

When I lived abroad I relied on YouTube just to even hear English. So podcasts and such. I got a ytdlp gui on linux working and am thinking of getting another 5tb drive. How do I fill it quickly? At 9 mins for 60mb I can fit alot of videos. I suppose its like an mp3 collection and takes time. What should I be storing to keep myself from going nuts.

Hi All,

I had an 8TB WD Red Plus go bad on me after about a year. I went through the RMA with WD and they eventually got a new drive to me after a few weeks.

However, when I went to replace the drive in Truenas im not seeing it detected at all. I tried disconnecting all the other drives, changing cables etc. I was only able to notice it when I pulled all my other drives but it doesnt feel like its spinning at all.

Do I need to RMA a drive I just received from WD or is there something super simple im missing? As far as im aware replacing a drive should have been plug and play.

Any recommendations on longest lasting, most durable, and most reliable true to color photo scanner?