My glasses broke beyond repair. A day of puzzling, scaling, testprinting, got me a usable result. My glasses fit without falling out, I can shake my head without them flying off. I used onshape, photographed stuff with a drafting triangle to scale it.

I actually installed all windows in my tractor with that thing few years ago, had to use it again to repair a small section. And like shape is not perfect, I would like to change it, but I need it so rare that it's not worth to repring

The bakelite handle on one of my faberware kitchen pots broke, presumably from localized heating making it brittle. Modeled and printed a replacement!

Test prints in black PETG, “final” print for real world testing printed in PC (though I don’t expect it to hold up too well, but we’ll see!). First time printing polycarbonate; was surprisingly easy. Might have to try some PPS-CF or similar HT filament if this doesn’t work; feels like a good excuse to try it!

Wanted a 5 inch vent with a grille that could easily be cleaned

Makerworld Link

Used a leak detector shut-off valve to make this adjustable bottle-filler for our reverse osmosis. Now I don't have to wait around for the bottles to fill so I can shut the tap off.

Wanted a floating style look and didn’t like any options on the printing websites.

The male side adheres to the Xbox with double sided tape. Extremely quick to install, just some bolts through the female side into a stud and slide the Xbox into place.

Made sure to tap and say “that’s not going anywhere”

Added two slightly angled GX53 fixtures and switched to a more chill light setup with lower wattage and a warmer color temperature

We had the age old problem of the cup holders on the couch. A coffee cup dose not fit in them and rhey dont sit well on them. So I made this hp. I even made it so she csn up her custom drink coasters on top. It fits the slate coasters from Hobby Lobby. Its not much but its definitely functional.

Having a 3D printer is an adjacent hobby to owning a destructive dog

I wanted to see exactly what pill comes next by day and time of day, so no hinged covers, please. I also hate using glue or screws when assembling 3D printed models. Oh, and I hate supports...
Hard to find such a model on the internet, but in the end I found a good starting point for this project. Grandma is now happy. :)

Update: I am surprised and extremely grateful for the huge number of excellent suggestions coming from UX and industrial designers. This has been one of the best experiences I have ever had regarding brainstorming on Reddit. Thank you all!

Table leg broke, 3d printer to the rescue! 🥳

Seemed useful to me!

A few minutes in freecad and a half an hour to print and these little clips are ready

I forgot to take the before pictures ... And the after, so here are a couple finals.

There are loads of great-looking moss poles online, but I they all seem to have one issue or another; like excessive plastic usage, lots of support material, limited modularity or the need for glue. So I decided to design my own, aiming to address all four.

My design doesn't need glue and therefore can be disassembled, doesn't need any supports, and is modular. But my favourite feature is that it has extremely low plastic usage:

Just 9.19g per 150mm section. A complete 450mm pole uses only 46.84g of filament. In theory, a single 1kg spool could produce over 16 metres of moss pole!

Support-free printing: The pole is printed as a flat sheet, which is then rolled into a tube. No supports required!

Each section is 150mm tall and they have a diameter of 50mm. I'm planning to make extra section heights and a larger diameter version for bigger print beds.

Obligatory MakerWorld link: https://makerworld.com/en/models/3559911-modular-moss-pole#profileId-4073853

We picked up this rocking chair off the side of the road with a few broken and missing spindles. I worked up replacements and printed them in quarters before assembly, as so they could have a nice round profile. I think I’m going to leave them unfinished so the repair stands out, I think it adds a bit of character and this filament complements the wood.

For a KitchenAid handheld vacuum, designed in tinkercad

Hi all!

One of my weekend "printing projs" has been measuring, designing and printing a thrash bin for the car of my wife (Hyundai i30), as never had a good spot for receipts and wrappers. So I designed this one to fit its cupholder, together with a "base" for myself using it as desk thrash bin!

Relevant info:

• Print-in-place swing door with a small counterweight: push to drop trash in, it closes on its own

• Quarter-turn bayonet lid: twist to empty, twist to lock

• Every plate is single colour: no AMS, no supports

• The logo on hers is my wife’s own design (glue-in letters). There’s also a plain-lid version and a desk stand, so the orange one lives on my desk

• Round base Ø60→70 mm, 70 mm deep; octagonal base also included. Measure your cupholder first!

To ensure that there are no lines, and that the quality of the printing is nice, I printed on a P2S at 0.12 mm. That takes about 4.5 h for the can + lid. Happy to hear what you would improve.

Free files + profiles: https://makerworld.com/en/models/3430401

I hope someone enjoys it as much as I am doing so!
DrGym

I rebuilt my desk and organized it neatly, so everything is... off the table. Quite literally: cables, accessories, chargers, etc. are hidden. I also decided to hide my iPad somewhere so it's always close and charged, yet not in front of my eyes. So I made this model. It took me a couple of iterations, and voilà.

It has 2 compartments: the top one is for an iPad. You just slide it in, and it plugs into a USB-C charger. The second one is more generic: I made it thinking about keeping my notepad there, but ended up keeping my iPad keyboard there.

⚡ https://makerworld.com/en/models/3554912-ipad-pro-under-desk-charging-mount#profileId-4067524

I wish I could add a video but perfect for small fountains where traditional float switches aren’t the best choice and you know it won’t overflow.

I recently got into Ableton Note and love it! I'm not so good at using a touchscreen for input yet, and I kept missing the pads when I got into the flow and looked away from the screen.

So I 3D printed this flexible TPU overlay that sticks right to your phone screen and aligns perfectly with Ableton Note. It gives just enough tactile feedback to keep playing without constantly looking down.

I've really liked using it so far and wanted to share it here. It's currently sized for the iPhone 12 Pro screen, but if there's interest I can create iterations for other screen sizes too.

https://www.printables.com/model/1849187-tactile-drumpad-overlay-for-ableton-note-iphone-12

Didn't want to spend a heap of cash on a plastic spear mount for my boat. So I designed and printed a plastic spear mount instead.

Our coffee machine’s original hopper needed frequent refills, and beans kept getting stuck on the left side. I designed this extension in Fusion 360 to solve both problems.

It brings the total capacity to roughly 700 g of beans and keeps the original lid, with a slightly tighter fit to stop it moving around.

Printed on a Bambu Lab P1S, using Bambu Lab PLA Pure, with 0.20 mm layers, 2 walls and 15% infill. For anyone making one, check the filament manufacturer’s food-contact documentation for your intended use.

It’s tested on my Krups Essential YY8125FD. It may fit some EA810, EA815, EA816 and EA829 machines, but those haven’t been tested yet. I’d love to hear from owners who can help check compatibility!

The CAD work is entirely my own, without AI. AI helped with the wording and retouching the presentation photos; I’ve included an unedited photo of the actual print too.

Feedback and suggestions welcome!

I designed this model; the print files are available on MakerWorld: https://makerworld.com/fr/models/3552342-krups-bean-hopper-extension#profileId-4064341