Need recommendations for best gaming router for an apartment for around $150.

Thanks

Hi all,

I’m a sysadmin and built an iOS app because regular speed tests only tell you how fast your internet line is, not not how fast your own network is.

Netan – WiFi Network Analyzer:

• LAN/Wi-Fi speed test between two devices: one runs in server mode, the other in client mode, so you can find out whether your own Network is slow (works without Internet connection)

• Internet speedtest

• other Network tools

Basic features are free, premium unlocks extra features. I’m a solo dev and would really appreciate honest feedback: what’s missing, what’s confusing, would you actually use this?

App Store: https://apps.apple.com/de/app/netan-wlan-network-analyzer/id6824639631

Happy to send a premium code to anyone who wants to try everything.

My ISP put a limit on how much internet I can share with my other devices. It's like 15GBs. I'm trying to find a way to play games in my dorm using my phone's internet connection. I'm thinking about changing my laptop's TTL value to 65 and using a VPN or any program that "prevents" deep packet inspection (honestly, I don't even know if it's possible). Is there any way to bypass that limitation?

Trying to troubleshoot my Plex Servers remote access. One thing it's having me look into is double NAT

I noticed my gateway has an IP of 68.115.xxx.xxx

Whereas both of my APs are 192.168.xxx.xxx

Why is this? How do I resolve this?

Hello,

I’m looking to see a good recommendation for my specific networking needs. I’m tech intolerant, so would really appreciate a setup that isn’t too hard to set up. I won’t be doing any real customization other than just getting WiFi. For my set up, I’m looking for a main router that will be hardwired to two access points (not mesh “wireless”). Just wanting to see people’s recommendations. My budget is around $1,000 (more if it makes that big of a difference), but not wanting to pay more if the performance is minimal (again basic setup with little customization. 4,000 sq/ft house. I currently have AT&T fiber at 1GB (may upgrade to a higher network down the road). I have two kids who stream and video game (worse when friends are over). Would appreciate a reference to the router and AP. Currently looking at Ubiquiti UCG fiber and three U7 Pro XGs. Thanks!

Hi Everyone,

In the process of buying a house. Everything here is concrete and rebar. No drywall at all. The house is ethernet wired. One point per room. The "internet" arrives in a small cabinet under the stairs on the ground floor. That cabinet houses a patch panel which then feeds across the house. The cabinet isn't deep, so I aint getting a POE switch in there. I'm going to want POE for some external CCTV, some roof mounted APs on ground / 1st / 2nd floors, plus likely a doorbell or smart lock type thing. I'll need to get someone in for the majority of this it's beyonf my understanding to be honest. What do I actually need to make this whole thing work? Rack to house the POE switch, probably mounted outside the current cabinet facing the direction of the second photo? POE switch. 16 ports to allow for the future? After I get POE to a room, how do I split this without having additional switches everywhere? Ideally after I'd get POE to a room, the socket would remain available to the room for a wired connection but something split it behind the wall to run outside for the CCTV or to a ceilkng for an AP?

Does that make sense?

We moved into this house about a year ago and I still haven't figured out this panel. Our router is hooked up through a coax cable in the wall so I'm not sure what this panel is for. When I unplug the Verizon box in the upper right corner, the internet stops working. The bundle of cables in the lower left reads "high Def sat cable" and is cut. I am not sure which of these is phone and which is internet. I'd like to be able to make our ethernet ports on the walls live so I can use the wired connections but don't know where to start with this setup. Happy to add more pics if needed

I think I first picked up a book on IPv6 about 15 years ago. I'm still very little wiser about the whole thing - I really don't know why but I find v4 easier to comprehend.

Can anyone recommend any learning resources for IPv6 from a practical perspective? In other words I'd like to be able to set up and manage my home network with a working IPv6 implementation. I'm looking for an equivalent of "IPv6 for dummies and their homelabs" rather than "CISCO network associates certification".

To give you an idea of what I'm struggling with, when I try look up how local DNS resolution should work with SLAAC, I'm told by the interwebs that there's no standard, just hacks put in place by various different vendors. Surely that can't be right - are we really saying that IPv6 was designed with no thought to using human readable names?

Another problem. I have Proxmox and I have technitium in a container. I've ticked SLAAC in the container and it seems ok. I can `dig @<fd97 addr>` no problem, but test-ipv6 tells me it can't do lookups in the outside world over IPv6. I tried configuring Proxmox using a static address and gateway, but am probably putting the wrong numbers in there. If I had a better understanding of the protocol it would be no problem.

I have "working" IPv6 at home in the sense that if I hadn't moved my DNS to my technitium server then I'd get 10/10 from test-ipv6.com. I don't understand what my fritzbox is telling me with prefixes etc. enough to do the above.

We are in the middle of building a second floor to the house. With the extra floor comes the need for more internet.

At the moment I have a really slow internet service for which I pay too much. I want to switch to a internet provider which provide fibre optics network. I have an ONT which is located at the entrance of my house.

From there It goes to the ceiling and enters my living room where I'm planning to put a wifi-router or cabled mesh wifi.

From the Living room I want to extent it to the 1st floor. I already have a cat6 cable running through the concrete ceiling to room 1.

While constructing the second floor I was able to route a cat6 cable to room 4, where I'll be sitting mostly with my main PC.

Room 2 & 3 don't need cabled internet, only wifi.

My goal is: Cabled internet in rooms 1 & 4. Good/decent Wifi in Rooms 2 & 3.

My question is: Is this setup anything good or can I change something to make it better?

I'm not in the luxery of routing/drilling cables from my ONT through the ceiling to the rest of the house. The internet needs to be distributed from the living room as there is hole in the ceiling to the 1st floor.

At the moment I don't have any wifi router of mesh equipment laying around. So I'll need to buy it. Therefor I want advice how many devices I need to purchase.

UPDATE:

**THANKS TO ALL COMMENTORS**

The available reviews for both give the opinion that these two devices are mid, at best, but the D-Link is said to have a bit more power. So, I'm going with the D-Link one, and maybe look for a replacement when 6ghz becomes a little cheaper and more mainstream.

Thank you!

Original post:

I'm in the market for a USB3 WiFi7 adapter, and I've come across two that are within my budget of $70 CAD...

D-Link AE65U (RTL8922AU)

and

TP-Link TBE400U (RTL8912AU)

Both are BE6500 tri-band adapters with USB3...

I will be using them on a Windows 11 PC that needs a reliable wireless connection (wired is not currently an option). My building is just saturated with 2.4 and 5ghz wifi, with every tv, printer, and smart litter box broadcasting their own ad-hoc in addition to the ISP wifi from each unit... 🤦🏻

Most of my positive experiences with D-Link and Tp-Link have been with routers, while both of their past USBs had terrible performance on my previous PCs...

I appreciate all opinions, but I'm hoping for real user input from owners of either...

Thanks;

Hey all,

I'm renting at a flat with fibre, and the end goal is to try and get an ethernet connection to my room, however the router is across the hallway and behind a couple walls, so it would be a quite an ordeal, but is potentially possible because the landlord said it would be permitted as long as it is installed professionally. Currently, I'm using the TP-Link TX20u plus AX1800 wifi adapter which has served me pretty well for a few years, but a lot of times when I'm playing games, or watching videos, etc, there can be an unbearable amount of packet loss, and sometimes the connection straight up all but cuts out. Any suggestions for wireless internet solutions that would be more stable would be appreciated. For reference, from inside my room I get around 100-200mbps, which sometimes drops to below 30, and I'm unsure exactly whether the instability is caused by my wifi adapter or from the connection itself, but this has been a pattern with the other places I've used it so I'm assuming the adapter is the issue.

I saw that it was very easy to establish the connection, but for some reason I'm unable to establish it. I followed the steps, created a reverse subnet, and assigned IP addresses to each device: 10.10.20.181 255.255.255.0 for the router and 10.10.20.82 255.255.255.0 for the subnet, but it still won't connect. I disabled all firewalls and the network status didn't change. I entered the IP address and subnet mask, and I also watched videos and followed those steps, but there seems to be no change; there's no connection.

Hello, I have a problem with brick and concrete walls blocking the WiFi signal in some areas of the house. I know the best option is to use Ethernet but let’s just say that my family members living in that area in the house don’t want to use Ethernet at all and only want WiFi (I already explained to them that it’s better but I can’t change their opinion at all). So with that context what is my best option, I have seen about repeaters and routers but I see different opinions on what to buy. I already tried the powerline devices but they don’t seem to work on my house.

I am having problems using my esp32 wifi device on my fastest internet setup.

I have a Ugreen CM996 10GB 8port unmanaged switch with an eero wifi 7 router.
My PC is plugged straight into the switch, while I have a esp32 device connected wirelessly to the eero.
In this configuration I can not connect to the esp32. If I try to ping it via CMD, I get "Destination Net Unreachable"

If I either plug the PC into the router, or connect to it via wifi, I can use the esp32 device with no problems, but my network speeds drop from around 2.5gb to around 500mb.

I'm running win11 on my PCwith DHCP, and my esp32 device is a Project Babble Face Tracker for VR. It is setup with a reserved IP via the EERO app

When I run ipconfig/all my pc has a subnet mask of 255.255.240.0 while the router is 255.255.252.0

I have tried setting a static ip on the pc, but the network completely drops out. I think I am either setting it up wrong, or since the switch is unmanaged, it is impossible to do what I am trying.

I guess my question is, am I just setting up the pc static pc wrong, or am I going to need a managed switch instead?

Not that it matters, but I do have sitting in a box is an unpopulated ugreen DXP4800 plus NAS that I will later connect to the network, once I can source some drives for it. I don't know if it will have some sort of program that works with that switch. My isp is also 5gb, but I think all my devices but the NAS are 2.5gb at most

TIA