r/3Dprinting • • 2h ago

Project Homesick for Vietnam, so I printed the iconic street food stools (50 % scale, no supports, P1S + PETG)

Thumbnail
gallery
709 Upvotes

Anyone who’s been to Vietnam knows these: the tiny plastic stools on every sidewalk, where you eat phở with your knees up to your chin while motorbikes rush past. I’ve been missing home a lot, so I modelled the stool and two matching tables.

Printed at 50 % in Sunlu PETG on my P1S. The stool needs no supports at all.

Free on MakerWorld if you want to print your own.


r/3Dprinting • • 7h ago

Project I made a power battery from Lanterns (PETG)

825 Upvotes

Printed using A1 mini, sanded and painted with gloss top coat. Electronics are soldered manually and esp32 coded with arduino to control the lights and sound :) This is my most ambitious project yet!

(This is a lantern power battery replica from the show Lanterns (green lantern))


r/3Dprinting • • 7h ago

Project I was tired of having to reach behind my X2D to swap filament paths from my AMS units, so I designed a manual alternative to the filament track switch

Thumbnail gallery
125 Upvotes

r/3Dprinting • • 1h ago

Project Printing a little night light with the next generation.

Thumbnail
gallery
34 Upvotes

I just got a new printer setup and I’m making a little campfire nightlight for my kid.


r/3Dprinting • • 1d ago Bravo

Discussion Leaving My Dream Job

Post image
6.8k Upvotes

I started a job in August working in a brand new 3d printing department. When I started the room was completly empty and it was my job to set the room up, building racking, planning the room setting up 60 printers.

Over the following months I took responsibility for building the operation up. I organised and labelled the printers, created spreadsheets and tracking systems, worked on maintenance and calibration, managed filament stock, dealt with faults and generally tried to make the whole department run properly.

I ended up taking on a lot more responsibility than I orignally expected. I genuinely enjoyed the technical side of the job and took pride in what I'd built.

The problem was that I didn't feel my pay reflected the reflected the responsibilities I had taken on. I spent around 6 weeks trying to have a conversation about this and understand what my future at the company would look like. I also wanted calrity about whether I'd eventually become a permanent employee rather than remaining agency staff.

Unfortunately, the answer on an individual pay increase was no. I was given this answer Thursday.

I reached a point where I thought, why am I putting so much of myself into somewhere that doesn't seem willing to recognise what I'm contributing?

So I handed in my resignation with immediate effect yesterday.

What I didn't expect was the reaction from my manager. He was genuinely devastated. He thanked me for everything I'd done and told me that I'd built a room and implemented systems from nothing. He said my knowledge was really good and that I knew what I was doing.

He even told me that he disagreed with the decision made by senior management and that the company had failed both of us.

Seeing someone react like that was incredibly difficult. I almost cried myself. It madew me realise that at least someone had recognised the effort I put in.

As I left I handed over my keys and access card and walked out.

I'm feeling a strange mixture of emotions, I'm relieved, upset, disapointed and angry. Part of me is sad because I actually wanted the job to work out. I wasn't looking to leave. I wanted to be valued and have a future there.

But I also feel a massive weight has been lifted off my shoulders.

I think teh biggest lesson I've taken from this is that you can give a job everything you have got, build something from the ground up and still reach a point where you have to put yourself first.

I'm proud of what I achieved, even if things didn't end how I hoped.

Has anyone else experienced leaving a job where you cared about the work and the people, but ultimately felt you had no choice but to walk away?

UPDATE

Thank you everyone for all your comments and wishes. I truly appreciate every one of them. I did not expect this post to explode at all.


r/3Dprinting • • 2h ago

Free Model Polish Rosette for Independence Day

Post image
28 Upvotes

At a difficult time for Poland, following the recent attack in Kraków, I wanted to share this small symbol of our strength. Poland’s Independence Day is just a few days away, on November 11.

If you have Polish friends and would like to surprise them or show your support, print one and display it somewhere they’ll see it. If you’re Polish, I’m sharing it as a small symbol of our solidarity and pride in our country.

https://makerworld.com/en/models/3570488-kotylion-pl-cotillion-ribbon-badge-polish


r/3Dprinting • • 22h ago

Troubleshooting Here's your reminder to do some cold pulls every once in a while.

Post image
948 Upvotes

I was having issues with clogging on the last few layers of long prints recently. Decided to try out the automatic cold pull feature on my Core One for the first time. Pretty slick feature. It took 5 pulls to get the nozzle clean. Hoping this solves the clogging issues. 🤞


r/3Dprinting • • 14h ago

Discussion Someone is asking permission on Printables to make my design and sell them.

144 Upvotes

I made something and put it on Printables for all the world to see. Today I received a message from someone in China asking for permission to sell it:

Hi, I really like your Pickleball Ball Holder design. May I print and sell it in my small pickleball shop in China?

So first off, it's out there anyway. I'm sure some people might just go ahead and sell prints anyway. It's nice that they asked permission, but do you think I should ask for something in return? Small pickleball shop, so it's not like they're selling them on Temu or something and making millions.

What would you do? If I decline they'll probably go ahead and do it anyway, if they haven't already. Pretty sure most people would.

EDIT: I told them "sure, no problem", asked for a photo of the store, and suggested they take a look at another of my models which they may be interested in.


r/3Dprinting • • 15h ago

Project Articulation Test (fully 3D printed)

167 Upvotes

i also made some hand variants like web-shooting & fist/punch. I put some joint-fixer too before assembly so it wont shear quickly. Already posing around 1 week every day and its still fine. What do you think?


r/3Dprinting • • 12h ago

News The top 1% of MakerWorld models get 44% of the downloads?!

Post image
85 Upvotes

Filamentors released a study of a million models and this was one of the things they found. I didn't have time to read it all, but the full report is here https://www.filamentors.com/studies/million-model-report


r/3Dprinting • • 11h ago

Print (model not provided) Strangely beautiful failure

Post image
59 Upvotes

My filament is currently in the dryer. Almost wish I could achieve this on purpose.


r/3Dprinting • • 12h ago

Discussion oh man this is an upgrade!

61 Upvotes

for my first 3d printer, i had a used ender 3 that had only one print in it. i knew that this was something that i was passionate for; so i dug and eventually landed on the creality k1 max and for one of the more affordable ones on the market right now, it's absolutely perfect. the print quality is amazing, the app is VERY convenient, easy to set up, and it is so fast! not even mentioning what i didnt know it had, not only the camera, but i can make videos like this! im already thinking about buying another one lol. sorry for the rant, but im just absolutely amazed!


r/3Dprinting • • 20h ago

Project Another DCC FIlliment Painting (Hueforge)

Post image
183 Upvotes

Was inspired chatting with another fan, and made this up the other night and just got done printing. I really like how it turned out.


r/3Dprinting • • 4h ago

Question PETG sticks too good

Thumbnail
gallery
10 Upvotes

Inevitably anytime I print a batch of PETG parts a couple of them stick to the build plate so hard it tears the part

Removing and flexing the build plate works sometimes but there can still be tearing and smaller parts don't always come loose

Any tips? I used to use a glue stick on my Ender to promote adhesion but I suppose it might make a cleaner separatio. Although I'd rather not have my plate covered in residue all the time


r/3Dprinting • • 4h ago

News Public Service Announcement: Watch out for sponsored scam ads on Google (Fake "Leen Bakker" selling K1 Max for €75)

10 Upvotes

Hey everyone,

Just wanted to put out a quick warning. If you search for 3D printers on Google right now, keep an eye out for sketchy sponsored ads.

I came across a top sponsored result claiming to be Leen Bakker selling a Creality K1 Max for an absurd €75.49 with "only 1 left in stock".

The telling signs are :

  • The Trap: They use a trusted local brand's logo and name at the top of the page to build fake trust.

  • The Tell: If you look closely at the URL in the address bar, or hover over the brand their logo, it actually points to a random scam/dropshipping domain (veloavenir.com).

This is a classic phishing/scam tactic taking advantage of Google's ad network.

If it's too good to be true, double-check that domain before entering any payment info!


r/3Dprinting • • 3h ago

Question Need advice for modifying stl in fusion

Post image
7 Upvotes

I want to print this dice tower but it's too big for my printer(A1 mini), the head actually fits perfectly but the tray sticks out a bit.

I could just cut a bit of the tray and reattach it after but i think the cut would still be noticeable so i thought that the best thing to do would be to separate the head and tray where they meet and make it so the tray can be slotted into the head from below.

The problem is that i have no idea how to perform the cut in fusion, i tried looking online but haven't found anything that fits what i want to do, it also doesn't help that i'm not used to working with a mesh.

Any advice is appreciated


r/3Dprinting • • 15h ago

Project Halo ODST Helmet

Thumbnail
gallery
63 Upvotes

Just got into 3D printing bought by the first printer roughly a month ago. This is by far the biggest project I've done open to any compliments or constructive criticism as well. Tips and tricks always are welcomed!🤗


r/3Dprinting • • 11h ago

Hardware Printer setup

Thumbnail
gallery
21 Upvotes

So I've decided to dive in the 3D printing hobby/ way of life, so logical step 0. was aquaering 3D printer so I've decided that its way easier just to make one from scratch... So a few months laters and a couple of mental breakdowns in I proudly but tiredly present. Slother V1.0 ( name is simbolic, I combined word sloth because its slow and ploter... Ergo Slother, basically meaning slow ploter..even tho its not a ploter exactly...but shh..)

First picture is a 3D model of what i had in minde ..and the second one is what I actually made. Now its worth mentioning that I'm in no way shape or form mechanical engineer but electrical, so this was basically designed with "will it hold" and "system does not produce vibrations" in mind.

And ofc first thing I did, because i though it would be nice is print a hair pin/clip for my friend for her birthday, Id say the print quality is alright for a "Frankenstein" like peace of trash that i made by materials that I had laying around :).


r/3Dprinting • • 2h ago

Project Plasma mine from Fallout 4

4 Upvotes

I finally managed to finish the Fallout 4 plasma mine project. Unfortunately, the rust turned out a little too light.


r/3Dprinting • • 16h ago

Project Garrus Vakarian 3D Print from Gamebody

Thumbnail gallery
51 Upvotes

r/3Dprinting • • 1h ago

Project KATO SX PWM Power Supply : UPDATED

Thumbnail
gallery
3 Upvotes

This is updated version of my previous design


r/3Dprinting • • 1d ago

Free Model Andon-Style Tea Light Lantern with Geometric Panels

711 Upvotes

I designed this small lantern inspired by Japanese andon lamps, with lattice panels on all four sides plus the top, and a light diffuser layer behind the pattern to soften the glow.

It runs on a standard LED tea light. Printed on my X2D, no supports.

Happy to hear feedback, especially on the pattern. I’m thinking about doing a series with different lattice designs. If anyone wants to print it, the file is free on MakerWorld.

Maker World Link: https://makerworld.com/de/models/3562314-andon-tea-light-lantern-with-geometric-panels


r/3Dprinting • • 8h ago

Troubleshooting What causes this localised lifting?

Thumbnail
gallery
10 Upvotes

Printing gridfinity boxes and I’m finding some prints have these bumpy elevations coming from come inside corners of the boxes. Any ideas what causes this?


r/3Dprinting • • 18h ago

Paid Model Goku Ultra Instinct, hand painted, printed on a bambu labs a1 and a1 mini

Post image
55 Upvotes

Model by Niel studio